Night Clubs & Pubs
Nightclubs and pubs are frequently the source of high noise levels requiring carefully considered acoustic treatment. Mason U.K's products can prevent the transmission of noise and vibration.
Pubs and nightclubs are, by their very nature, frequently loud places; jovial people, sound systems, bands, DJ's, or a gig and you may suddenly have a very noisy environment on your hands. You may be required by law (or irritated neighbours) to monitor and control the acoustic and vibration levels produced. Mason UK can help; we have extensive experience in isolating these types on environments.
Acoustic Isolation Methods Available
Mason UK can design and supply products to prevent the transmission of noise/vibration through walls, ceilings and floors. We can also design local isolation, e.g. for dance floors and speaker mounts.
A nightclub or pub that products a high noise level may require a �Box in a Box� construction, which will totally isolate a room from the surrounding building structure. Whatever your problem, Mason UK Ltd will produce a bespoke design to solve it. Some typical solutions are listed below.
Ceiling Isolation
A pub may have lower noise levels than a nightclub, but if there are residential living areas above it, or neighbours nearby, it may still require an acoustically isolated mass barrier ceiling.
We would usually recommend suspending an acoustically isolated ceiling using our HDQF hangers. More information on these hangers can be found at the bottom of this page. Other hanger types are available depending on the ceiling type and the acoustic requirements. Click the �products� drop down menu at the top of the screen and scroll down to the relevant option.
Box in a Box Construction
For venues with louder events, we recommend the �Box in a Box� method to achieve total acoustic isolation. This is perfect for nightclubs or very noisy pubs that may be in a residential area.
The acoustic floating flooring is the first element to be constructed. This is lifted to form an air gap and isolated from the existing structure through either LDS rubber (previously neoprene) or sometimes springs. The walls of the structure are built upon this flooring and are only attached to the external walls through our special acoustic wall braces. The ceiling is supported on the walls or suspended from acoustic hangers. For more information on these products recommend, please scroll down to the bottom of the page. Other products can be viewed via the �Products� drop down menu at the top of the screen.
Conclusion
We completed numerous projects for clients with similar needs to those mentioned above. You can view some of these projects in the grey bar to the right. We recognise that each project is bespoke and therefore will create a design best suited to your needs.
If you are interested in having a nightclub or pub acoustically isolated, or just have a question, then please contact our friendly acoustic engineers. They will be happy to discuss your project requirements and any queries you may have. Contact details are to the left, in the blue bar or you can email us a quick message via our Contact page.
Typical Products Used
HDQF - Spring Hanger
HDQF Spring PDF
View Datasheet HDQF Spring Installation Instructions
View Datasheet |
HDQF DWG
View CAD File |
Rubber Mounts & Pads
HDQF - Rubber Ceiling Hangers
HDQF-A - Acoustic Hanger PDF
View Datasheet |
HDQF DWG
View CAD File |
AFA - Acoustical Furring Attachment
AFA Data Sheet
View Datasheet |
DNSB-A Sway Brace / Wall Tie
DNSB Sway Brace PDF
View Datasheet |
Isolated Walls
L.D.S Rubber Hangers
Jack-Up LDS Rubber Floating Floors
Small FSN Floating Floor Mount
View Datasheet Large FSN Floating Floor Mount
View Datasheet Floating floor brochure
View Datasheet |
Concrete Floating Floors
Spring Floating Floors PDF
View Datasheet Rubber Floating Floors PDF
View Datasheet |